Can I get a pump energy audit for my factory?

Yes. Target Marketing offers comprehensive pump energy audits across your installed fleet, identifying inefficient operating points, oversized pumps, throttled valves and VFD opportunities. Typical audit identifies 20-40% energy savings with payback under 18 months. Audit is free for fleets >10 pumps where we are also supplier.

How much energy can I save with VFD retrofit on existing pumps?

Variable Frequency Drive (VFD) retrofit on centrifugal pumps with variable flow demand typically delivers 25-40% energy savings. Pumps operating with throttled discharge valves benefit most. Affinity laws apply: a 20% flow reduction via VFD cuts power by ~50%. Payback is usually 12-18 months for pumps above 30 kW.

What is BEP (Best Efficiency Point) optimization?

BEP is the flow rate where a pump operates at peak efficiency. Pumps running far from BEP (typically 120% of BEP flow) waste energy and suffer accelerated wear. BEP optimization involves resizing impellers (trimming), adjusting system curves, or replacing oversized pumps to ensure operation within ±10% of BEP.

What is LLC (Lowest Life Cycle Cost) pump analysis?

LLC analysis evaluates total ownership cost over 15-20 years: capital cost (5-15%) + energy cost (50-80%) + maintenance (10-30%) + downtime (variable). The cheapest pump rarely has the lowest LLC. Energy-efficient designs with premium materials often deliver 30-50% lower LLC despite higher upfront cost.

Pump Energy Audit | Efficiency Optimization & LLC Analysis

14+ Years of
Field Experience

Our Services

Pump Energy Audit — Cut Power Bills, Extend Pump Life

Pumps consume up to 22% of industrial electricity worldwide. Our energy audit identifies inefficiencies, recommends retrofits and quantifies the ROI before you invest a rupee.

From performance testing to system-curve analysis, BEP assessment, Corocoat hydraulic upgrades, mirror-polished SS impellers and VFD recommendations — we deliver detailed savings reports with payback period.

Energy Savings BEP Analysis Corocoat Upgrade VFD Retrofit

Request Service +91 9624042143

What We Offer

Energy Audit & Optimization Services

8-point pump audit covering performance, efficiency, retrofits and ROI — data-driven, vendor-neutral.

01

Performance Testing

Measure actual flow, head, power & efficiency of existing pumps vs. nameplate ratings.

Field Testing

02

System Curve Analysis

Map actual system resistance vs. pump performance curve to identify mismatches.

Curve Mapping

03

BEP Assessment

Evaluate how far pumps operate from Best Efficiency Point — the biggest source of waste.

BEP Distance

04

LLC Analysis

Lowest Life Cycle Cost comparison of retrofit vs. replacement vs. status-quo over 10-15 years.

TCO Compare

05

Corocoat Upgrade

Hydraulic parts coated with Corocoat for higher efficiency, smoother surfaces & longer life.

Premium Coating

06

Impeller Optimization

Trim, replace or upgrade with mirror-polished SS impellers for efficiency gains up to 5%.

Impeller Tuning

07

VFD Recommendations

Variable Frequency Drive analysis for variable-load systems — up to 30% energy savings.

Speed Control

08

ROI Report

Detailed savings analysis with payback period, energy cost reduction & CO2 abatement.

Quantified ROI

How We Engage

4-Step Energy Audit Process

From baseline measurement to retrofit implementation — with verified savings.

Step 01

Baseline Measurement

Site visit, energy meter installation, flow / head / power measurement on critical pumps.

Step 02

Analysis & Modeling

BEP assessment, system-curve plotting, LLC calculation & energy-loss attribution.

Step 03

Audit Report

Detailed report with retrofit options, savings projection, payback period & ROI.

Step 04

Implementation

Corocoat / impeller / VFD retrofit, post-implementation measurement & savings verification.

Free Consultation

Ready to slash pump energy bills?

Our energy audit team delivers measurable savings of 10-30% on pump power consumption — with verified ROI.